1. Pelton Crane 420c Manual For Sale
2. Pelton Crane Dental Light Troubleshooting

.Classic Twelve O’clock Cabinet Installation Instructions CF36 CF42.THIS MANUAL IS FOR AUTHORIZED AND QUALIFIED INSTALLATION PERSONEL ONLY! Table of Contents General Information.3 CF36 Cabinet Overview.4 CF36 Cabinet Dimensions.5 CF42 Cabinet Overview.6 CF42 Cabinet Dimensions.7 Optional Computer Storage Overview.8 Optional Computer Cabinet Dimensions.8 Preparing the Site.9 &.General Information Equipment Disposal Definitions of Symbols The following symbols may be used throughout the product manual: Contact your local authorized dealer for proper disposal of the device to ensure compliance with your local environmental regulations. CAUTION: Failure to carefully follow the Interference with Electromedical Devices described procedure may result in damage to To guarantee the operational safety of electromedical devices, it is.CF36 Overview A-C, upper module, storage B, counter workspace D, accessory panel E, central column, power chase K & M, lower module, storage L, unit mount area.The CF cabinet provides a work surface, storage, and can be installed with or without a Pelton & Crane delivery system.

The CF36 cabinet also provides a work surface and outlets. It is designed with the Dentist and staff in mind to provide a robust working enviroment for the daily activities of performing dentistry.CF42 Overview A-C, upper module, storage B, CPU storage D, accessory panel E, central column, power chase F, counter workspace K & M, lower module, storage L, unit mount area.CF42 Overview The CF cabinet provides a work surface, storage, and can be installed with or without a Pelton & Crane delivery system. The CF42 cabinet also provides a work surface and outlets. It is designed with the Dentist and staff in mind to provide a robust working enviroment for the daily activities of performing dentistry.Optional Computer Storage Overview A computer can be stored in the center storage area of the upper cabinet.

Insert the computer’s cables through the access holes in the bottom of the cabinet and route to the utility box. Place the CPU so the front is facing the cabinet door.Preparing the Site WARNING: Always lift cabinets by bottom edge, being careful to lift with your legs and not your back. CAUTION: Make all required, air water and drain attachments from the utilities to the incoming stub up connections before the delivery system installation occurs.

Pelton Crane 420c Manual For Sale

Pelton Crane Dental Light Troubleshooting

Doing so prevents damage to the utility lines from heat associated with some plumbing connection methods.Preparing the Site (Cont’d) NOTE: The template illustration depicts the mounting points. Lay installation template over plumbing stub-ups and check the distance from the cabinet to the walls according to operatory layout. (Floor template is depicted in illustration. Stub-up information in the tem- plate illustration applies to all models.) 2.Cabinet Installation Remove the box and shrink wrap from around the cabinet. Unclip the doors and/or drawers and place in a safe area.Cabinet Installation cont’d. Remove the shelves from the upper and lower cabinets.

Remove the (4) bolts, washers and nuts holding the cabinet section to the pallet. Center brackets used on 2800 only Washer Bolt.Cabinet Installation cont’d. Using the floor template provided, drill for concrete (4) 3/8” x 3” deep holes, for wood drill (4) 1/4” x 2-3/4” deep holes. For con- crete insert (4) 3/8” x 2-3/4” anchor bolt, washer, lock washer and nut, for wood in- sert (4) 3/8 x 3-1/2”.Cabinet Installation cont’d. Connect utilities in accordance with local codes.